Product Description
Yamato DNE-911 Programmable Forced Air Convection Constant Temperature Eco-Oven with Lower Power Consumption and CO2 Emission 540L 220V
High-performance, energy-saving, programmable constant temperature, forced convection oven with extended functions and safety features. Operating temp ambient +10~260˚C
Operation and Functions
-
- Bestseller based on excellent performance and affordability
- Superior temperature accuracy
- High precision controller allows high performance temperature control and display of CO₂ and power discharge
- Heat tightness and insulation design of the chamber achieves an energysaving rate of about 40% at constant temperature compared to previous models
- Maximum temperature reaching time reduced by 15 minutes (no-load) compared to previous models
- Program operation with a maximum of 32 steps, patterns repeatable
- Standard equipped with various support functions such as calibration offset, power failure recovery mode, save and access of user setting information, as well as other operation modes
- Data acquisition from internal test device possible because of cable holes
- Easy system upgrade with various option settings
Safety Features
-
- Standard equipped with various self-diagnostic functions such as independent overheat prevention device, overcurrent circuit breaker, and key lock functionSuperior temperature accuracy
Specifications
| Model | DNE-911 | |
| Circulation Method | Forced air circulation | |
| Operating temperature range | Room temp. +15 to 210°C | |
| Temp. adjustment accuracy | ±0.5°C (at 210°C) | |
| Temp. distribution accuracy | ±2.0°C (at 210°C) | |
| Max. temp. reaching time | Approx. 60 min. | |
| Interior/Exterior material | Stainless steel /Electro-galvanized steel sheet with epoxy and melamine resin baking finish | |
| Operation function | Fixed temperature operation, Program operation, Auto start, Auto-stop, Quick automatic stop | |
| Program mode | Program operation; Maximum 32 steps, Repeat function | |
| Additional functions | Timer Function (Actual Timer within 24hrs.), Total operation hours timer (to 65535hrs.), Calendar time ( 24 hours) | |
| Shelf plate with standard load | Approx. 15kg/piece (33lb/piece) | |
| Heat insulating material | Glass wool | |
| Heater | Stainless pipe heater, 1.5 kW×2 | |
| Fan Type | Scirocco fan | |
| Motor | Condenser type, 30W×2 | |
| Cable hole/Air in-take hole | 33mm I.D. (the right side) 1pc. | |
| Temp. controller | PlD Z control by microprocessor | |
| Temp. setting method | Digital setting by UP/DOWN key | |
| Temp display method | Digital Display by Green LED | |
| Timer/Min.division | 0 min. to 99 Hrs. 59 min. /1 min. | |
| Additional functions | Calibration offset, Power discharge, CO2 discharge, Power failure return mode, User configuration information | |
| Heater circuit control | Triac zero-cross control | |
| Safety countermeasures | Self diagnosis functions (Temp. sensor abnormal, Heater disconnection, SSR- short, Main relay abnormal, Automatic overheating prevention) | |
| Safety countermeasures | Key lock function, Independent overheat prevention, Electric leakage breaker with over current protection | |
| Accessories Shelf plate | Stainless steel, 8 pcs. | |
| Accessories Shelf support | 16 pcs. (2 pairs are fixed) | |
| Shelf Rest Step Number Shelf Rest Pitch | 29 steps / 30mm | |
| Internal Dimensions W×D×H | 1090×500×1000 mm | |
| External Dimensions W×D×H | 1220×695×1660 mm | |
| Internal Capacity | 540L | |
| Power Source 50/60Hz | AC220V 15A Single-phase | |
| Weight | 410lb |
Documentation
Conditions: temperature and humidity: 23 deg.C+/-5 deg.C, 65%RH+/-20% (no load)
External dimensions do not include protrusions.