Product Description
Yamato DG Series Glassware Drying Natural Convection Ovens
DG810C
Description
Natural convection oven for glassware drying
Operation and functions
- Large window for easy observation
- Can be used to store instruments after drying
- Highly efficient heat insulation material for both internal and external structure
- Adjustable foot for stability on uneven floors
- Mobile on casters (DG800C/810C/840C/850C)
- Equipped with stainless steel pipe heater and water receiving plate at the bottom
- Stainless steel interior, easy to clean and highly resistant to corrosion
- Dial setting and digital display of temperature control and timer
Safety features
- Self-diagnostic functions, calibration offset, independent overheat prevention, over current leakage breaker, key lock and auto recovery after power failure
(Note: Accurate temperature control may not be possible with heat generating samples in the chamber)
MODEL | DG800C DG810C |
---|---|
System | Natural convection |
Operating Temp. Range | RT+5~70°C |
Interior Material | Stainless steel |
Temp. Setting Method | Digital setting by ▲/▼ keys |
Heater | SUS pipe heater 1.34kW |
Temp. Controller | PID control with microprocessor |
Operation Functions | Fixed temperature, auto stop, auto start, quick auto stop |
Sensor | Temp. controller: K thermocouple, Overheat protection: Liquid-expansion temp. controller |
Exhaust Port | I.D. 34mm × 2 |
Suction Port | I.D. 30mm × 2 |
Germicidal Lamp | 15W×1 |
Internal Dimensions WxDxH | 620×600×1195 mm |
External Dimensions WxDxH | 674×711×1586 mm |
Internal Capacity | 445L |
Weight | ~78kg |
Door | Single door, silicon rubber packing |
Observation Window | Standard glass 3mm W250 x H700mm |
Shelf Plate Load | 15kg/pc. |
Shelf Rest / Pitch | 29 steps / 30mm |
Power Source | AC115V (with plug) AC220V (no plug, round terminal) |
Shelf Plate / Bracket | 4pcs. / 8pcs. |
Water Receiving Plate | 1pc. |