Product Description
The Yamato DF-1032 is a 1,000 L high performance programmable fine oven. “Fine oven” is Yamato’s designation for its tightest-controlled line, and the number that earns it is a temperature fluctuation of ±0.5 °C (at 200 °C).
The DF models run to the standard ceiling with the tightest control in the range. If your process is qualified at a temperature and has to stay there, this is the oven that holds it.
Key Features
- Room temperature +15 °C to 200 °C
- Temperature fluctuation ±0.5 °C (at 200 °C)
- Programmable to 99 steps and 99 patterns with repeat
- Heater capacity 6.0 kW · Two stainless steel axial flow fans (20 W capacitor motors)
- Accumulated power consumption, CO₂ emission and heater output on screen
- Operation time accumulation to 65,535 hours for maintenance and validation
- 1,000 L stainless chamber, 10 steps / 98 mm pitch, 30 kg per shelf
Technical Specifications
| Specification | DF-1032 |
|---|---|
| System | Forced air circulation and ventilation |
| Operating temperature range | Room temp. +15 °C to 200 °C |
| Temperature fluctuation | ±0.5 °C (at 200 °C) |
| Temperature slope | 15 °C (at 200 °C) |
| Internal capacity | 1,000 L |
| Internal dimensions (W × D × H) | 1000 × 1000 × 1000 mm |
| External dimensions (W × D × H) | 1700 × 1215 × 1530 mm |
| Interior material | Stainless steel |
| Exterior material | Chrome-free electro-galvanized steel, chemical-proof baked finish |
| Heat insulating material | Glass wool |
| Heater capacity | 6.0 kW |
| Fan motor | Two stainless steel axial flow fans (20 W capacitor motors) |
| Heater circuit control | Triac with zero-crossing |
| Temperature controller | PID Z control |
| Display | Set temp.: orange 5-digit LED · measured temp.: green 4-digit LED, 1 °C resolution |
| Program capability | Up to 99 steps, up to 99 patterns, with repeat |
| Timer | 1 min to 99 h 59 min, plus 24-hour clock operation |
| Additional functions | Operation time accumulation to 65,535 h, 24-hour calendar timer, calibration offset, accumulated power consumption, total CO₂ emission and heater output monitor, power recovery mode, user settings save and restore |
| Cable port | 30 mm I.D. (rear) |
| Exhaust damper | Manual operation |
| Shelf load capacity | 30 kg per shelf |
| Shelf supports / pitch | 10 steps / 98 mm pitch |
| Power source | Three phase AC220V 17 A (no plug, round terminal) |
| Unit weight | 450 kg (992 lb) |
| Shipping weight | 1,370 lb |
| Manufacturer part number | DF-1032 |
| GTIN | 797059926701 |
| Country of origin | China |
Safety Features
- Self-diagnostics: temperature sensor error, heater disconnection, SSR and triac short circuit, fan motor failure, main relay contact damage and overheating
- Independent overheat protection
- Door switch — fan and heater cut when the door opens
- Fan failure detection
- Key lock
- Electric leakage breaker with overcurrent protection
What’s Included
- Shelves and brackets
- Instruction manual
- One year manufacturer warranty
Installation requirements
This oven is hard wired — there is no plug — and requires a three phase 220 V supply. External footprint is 1700 × 1215 mm and shipping weight is 1,370 lb, so plan the delivery path, doorway clearance and floor loading before ordering.
Compliance
- Manufactured under ISO 9001:2015, ISO 14001:2015 and ISO 45001:2018
- US Harmonized Tariff code 8514.19.0000 · ECCN EAR99
For quotations, freight, rigging and installation, contact Pro Lab Supply.
