Product Description
A spray dryer turns a liquid straight into a dry powder in one pass. The feed is atomised into a hot air stream, the droplets dry in flight, and powder drops out the bottom — no filtration, no separation, no milling afterwards. For heat-sensitive material the trick is that each droplet is tiny and dries in a fraction of a second, so the particle itself never reaches the inlet air temperature.
The ADL-311SA is Yamato's most compact and affordable complete spray drying system, evaporating up to 1300 mL/h of water from a bench top or on castors. It suits formulation work, encapsulation, ceramics, food and pharmaceutical R&D — anywhere sample is scarce and a pilot-scale dryer would be absurd.
How this model is built up: The ADL-311SA is the ADL-311S main unit plus the GF300 Pulvis mini-spray attachment, supplied together. The bundle costs exactly what the two cost separately, so order whichever is more convenient. If you already own a GF300, buy the bare ADL-311S instead.
Key Features
- 40 to 220 °C inlet temperature, ±1 °C — low enough for heat-sensitive actives, high enough for fast evaporation
- Two-way nozzle, No. 1A as standard
- Drying air 0 to 0.7 m³/min and spray air 0 to 0.3 MPa, both continuously adjustable
- Peristaltic feed pump, 0 to 26 mL/min — the sample only ever touches tubing, so cleaning is a tube change
- Manual pulse-jet nozzle cleaning — clears a blocking nozzle without stopping the run and losing the batch
- PID digital control with K thermocouple and a touch panel for blower, heater, pump and pulse jet
- 4–20 mA outputs for inlet and outlet temperature, so the run can be logged externally
- Inlet or outlet temperature control, selectable
- Service outlet for a sample stirrer (AC 115 V, max 2 A) — keeps a suspension homogeneous while it feeds
- Compact: 580 × 420 × 1125 mm, 80 kg
Technical Specifications
| Model | ADL-311SA |
| Configuration | ADL-311S main unit + GF300 Pulvis mini-spray attachment |
| Inlet temperature range | 40 to 220 °C |
| Outlet temperature range | 0 to 98 °C |
| Temperature accuracy | ±1 °C at inlet |
| Maximum water evaporation | 1300 mL/h |
| Spraying system | Two-way nozzle, No. 1A standard |
| Drying air flow | 0 to 0.7 m³/min |
| Spray air pressure | 0 to 0.3 MPa |
| Nozzle cleaning | Manual pulse-jet at the nozzle tip |
| Feed pump | Fixed-amount peristaltic, 0 to 26 mL/min |
| Temperature controller | PID digital, K thermocouple |
| External output | Inlet temp., outlet temp. (4–20 mA) |
| Heater | 2.0 kW at 200 V to 2.88 kW at 240 V |
| External dimensions (W × D × H) | 580 × 420 × 1125 mm |
| Net weight | 80 kg (176 lb) |
| Power supply | Single phase AC 200–240 V, 50/60 Hz, 16–18 A — terminal switching required |
| Country of origin | China |
| Harmonized tariff code | 8419.33.1000 |
| GTIN | 797059929054 |
Safety Features
- Inlet and outlet overheat protection
- Sample feed reverse-rotation mechanism — backs the feed out rather than forcing it into a blocked line
- Overcurrent and electrical leakage breaker
- Nozzle connection error detection — the unit will not heat with the nozzle wrongly fitted
What's Included
- ADL-311SA — ADL-311S main unit with GF300 attachment
- Silicone tubes with stopper (3)
- Exhaust duct with hose band (1)
- Outlet temperature sensor
- Spray air tube
- Static electricity removal earth
- Instruction manual
Not included: Air compressor, GAS-410 organic solvent recovery unit, GWS-410 solvent washing unit, and product collecting containers (GF-32-168 / GF-32-168 LONG).
Installation Requirements
- Electrical: single phase AC 200–240 V, 50/60 Hz, 16–18 A. Terminal switching is required for your voltage — an electrician's job, not a plug change.
- Compressed air: an air compressor is required for water-soluble samples and is sold separately. For organic solvents the compressor built into the GAS-410 is used instead.
- Exhaust: ø50 mm connection — duct it out or to a hood.
- Organic solvents: require the GAS-410 solvent recovery unit. Do not run flammable solvents on an open-cycle machine.
Compliance
Country of origin: China. Harmonized tariff code 8419.33.1000. One-year manufacturer warranty.
Pro Lab Supply Corp is an authorized Yamato Scientific distributor. Spray drying is an application-specific purchase — tell us your solvent, your feed solids and the particle size you need, and we will specify the unit, the nozzle, and whether you need solvent recovery.
